Spring is injected inside the inert gas, produce elastic function through the piston products, the product is without external power, stable lifting, free expansion, (Lockable Gas Spring can be arbitrarily positioned) is widely used, but the installation should pay attention to the following points: 1. Gas Spring piston rod downward position must be installed, not flip and it can reduce the friction and to ensure the quality and performance of the best damping buffer. The decision of the 2. pivot mounting position is the correct gas spring work that gas springs must be installed with the correct method, namely when closed, let it move through the structure of the center line, otherwise, gas spring often automatically pushed open the door. 3. gas spring should not be inclined or horizontal force at work. Not used. 4. in order to ensure the reliability of the handrail seal, shall not damage the surface of the piston rod, it is strictly prohibited to paint and chemical coating On the piston rod. Do not allow the gas spring first installed in the desired position after spraying, painting. 5. high pressure gas spring products, non random analysis, fire and drop. 6. gas spring piston rod is rotated to the left. Such as the need to adjust the direction of the joint, can only turn right. The use of environmental temperature: 7. - 35 DEG to 70 DEG C. (specific manufacturing 80 c) 8. installation, should be flexible rotation, no blocking phenomenon. 9. dimensions should be reasonable, the size of the force to the right size, stroke piston rod should have 8 mm margin.
Product Categories : Auto Parts > Gas Spring